Brewers grains press dehydrator - plant press dehydrator.
Video introduction:
Pulp dehydration in Huizhou Paper Mill;
Input moisture content: 90%;
Moisture content after dehydration by Meibang equipment: 47.4%;
Equipment specifications (length, width and height): 4.5x2.8x2.4;
Weight: 6.5 tons;
Total power: 15 kilowatts;
2. Scope of application:
Food industry: cassava residue, potato residue, tofu residue, food residue, sweet potato residue, tea residue, water chestnut residue, wood residue, paper residue, duckweed, beer residue,
3、This equipment can strongly squeeze and dehydrate the plant residues with a moisture content of up to 80%-90%, such as cassava residue, potato residue, tofu residue, food residue, sweet potato residue, tea residue, water chestnut residue, wood residue, paper residue, duckweed, beer residue, Chinese medicine residue, and waste residue. The moisture content after dehydration is 25-30%, which can save the subsequent use. The equipment is easy to operate. Just press one button, and the equipment will run automatically 24 hours a day, and the labor intensity of workers is low!
2、带式压榨机脱水原理:
The material is conveyed to the hopper of the press through the conveyor. After passing through the distributor, the material is flattened and evenly distributed by the press roller through the inner and outer ring filter belts driven by the drive roller. In the pressing area, the large screen roller presses out the water and ensures that the water is pressed out from both sides. The diameter of the subsequent press rollers decreases, and the filter belt is "S" shaped, generating a shear force with increasing surface pressure. Under the action of the filter belt tension, the outer filter belt exerts pressure on the material to squeeze out the juice in the material. As the diameter of the press roller gradually decreases, the pressure on the material between the filter belts gradually increases, and the juice is continuously discharged. After 3 or 5 levels of pressing, the force on the material is constantly increasing. In order to ensure the best dehydration effect, the material then bypasses the drive roller. After the inner and outer filter belts are separated, a wear-resistant material scraper scrapes off the dehydrated filter cake (fruit residue) on the working surface of the inner and outer filter belts.
4、Press filter cake effect display:
5. Quality Assurance:
1. The main frame is made of high-quality national standard square tubes, which are firmly welded as a whole. Its surface is treated with high-strength anti-corrosion, and its acid and alkali rust resistance can reach more than 10 years.
2. The main body of the main machine is made of high-quality stainless steel, including: main dewatering roller, fender, water tank, waterproof cover, nozzle, and other parts.
3. The bearing seat is made of high-quality cast iron and fully sealed. The bearing is a double-row roller Dalian Metallurgical bearing, which can be guaranteed for three years. The extrusion roller, transmission roller, and guide roller are high-quality seamless pipes wrapped with high-quality wear-resistant rubber, which can be guaranteed for three years.
4. Different filters are selected according to the different physical properties of sludge. This machine uses high-quality filters with high strength, good water permeability, not easy to fill and block, smooth surface, high solid recovery rate, easy to clean, and easy to fold.