Sludge thickening and dewatering press, sludge filter press, sludge dewatering machine

    With the increase in quarries and sand washing plants, large amounts of yellow mud slurry are generated during sand production and washing, causing mud and water to splash everywhere. Environmental protection departments in various regions are paying close attention to this issue. Most sand washing plants have site limitations, and the size of their sedimentation tanks is limited. The mud and sludge generated during the sand production process in previous years were not treated in a timely manner, resulting in the sedimentation tanks being unable to hold the excess mud and water, failing to keep up with the current production pace. This creates a vicious cycle, increasing the need for manual mud transportation, which is costly in the long run and not the most thorough solution. Therefore, our company has launched a continuously operating sand washing mud treatment equipment. The equipment can operate continuously for 24 hours, unaffected by wind or rain. The treated mud cake can be directly loaded onto trucks and transported away, while the clean water can be reused in sand washing machines, truly achieving zero emissions and zero pollution.

The equipment can process various types of sludge, producing a very large output per hour. The dewatered sludge cake has a low moisture content and is so dry that it cannot be squeezed by hand. It can be directly loaded onto trucks and transported away. The discharged clean water can be directly recycled or discharged externally, and the discharged water meets the standards for industrial water use.

公司拥有12000平方厂房，各种型号设备随时备货方便急需客户使用。